SUSTAINABILITY
- - Precise process control (welding, cutting) - less waste, less garbage
- - Long-lasting quality components - fewer parts, fewer shipments
- - Digital documentation - less use of paper
- - Possibility of working with packaging materials of reduced thickness - thanks to the precision of the controls, less waste
- - Energy recovery servomotors - exchange capacity between axes inside the power bus
- - Solar power company - we produce a large part of the energy we consume
- - Extensive use of hybrid corporate vehicles
- - Reduced travel - technical and commercial services performed remotely as much as possible
RECYCLABILITY
- The "mono materials" currently trending as a recyclable solution require higher process accuracy in terms of temperature, pressure and cut control.
- Contrary to the trend, we built our machines taking expensive construction choices, characterizing them with superior controls and greater precision.
- The consequence is the possibility of working with conventional materials of lower weight and therefore cheaper, moreover, in large part, already naturally suitable for "mono materials".
INDUSTRY 4.0
More than twenty years ago, even before we've heard about Industry 4.0, we were providing remote connection services consisting of: troubleshooting via analog modem and management of cycle/event counters, hour counters, and events/alarms log on the machine, ready for the connection to an external supervision system, same thing for the extended troubleshooting on HMI for the alarms and the events log. Today, with the technological tools available, our machine automation allows various additional functions compared to what was done in the past:
- - Flexibility - format change (parameters from HMI)
- - Digitization - manuals and troubleshooting guide on the HMI
- - Customer care - worldwide remote access via the internet
- - IOT - possible worldwide machine status view (obviously only with the customer's permission)
- - Augmented reality - for mechanical / process support during a remote connection
- - Smart data - data transfer from machine to client-server, from the data table and/or database with a historical log of events, lots, etc.
- - Data online - depends on privacy settings
SUSTAINABILITY
- - Precise process control (welding, cutting) - less waste, less garbage
- - Long-lasting quality components - fewer parts, fewer shipments
- - Digital documentation - less use of paper
- - Possibility of working with packaging materials of reduced thickness - thanks to the precision of the controls, less waste
- - Energy recovery servomotors - exchange capacity between axes inside the power bus
- - Solar power company - we produce a large part of the energy we consume
- - Extensive use of hybrid corporate vehicles
- - Reduced travel - technical and commercial services performed remotely as much as possible
RECYCLABILITY
- The "mono materials" currently trending as a recyclable solution require higher process accuracy in terms of temperature, pressure and cut control.
- Contrary to the trend, we built our machines taking expensive construction choices, characterizing them with superior controls and greater precision.
- The consequence is the possibility of working with conventional materials of lower weight and therefore cheaper, moreover, in large part, already naturally suitable for "mono materials".
SUSTAINABILITY
- - Precise process control (welding, cutting) - less waste, less garbage
- - Long-lasting quality components - fewer parts, fewer shipments
- - Digital documentation - less use of paper
- - Possibility of working with packaging materials of reduced thickness - thanks to the precision of the controls, less waste
- - Energy recovery servomotors - exchange capacity between axes inside the power bus
- - Solar power company - we produce a large part of the energy we consume
- - Extensive use of hybrid corporate vehicles
- - Reduced travel - technical and commercial services performed remotely as much as possible
RECYCLABILITY
- The "mono materials" currently trending as a recyclable solution require higher process accuracy in terms of temperature, pressure and cut control.
- Contrary to the trend, we built our machines taking expensive construction choices, characterizing them with superior controls and greater precision.
- The consequence is the possibility of working with conventional materials of lower weight and therefore cheaper, moreover, in large part, already naturally suitable for "mono materials".
INDUSTRY 4.0
More than twenty years ago, even before we've heard about Industry 4.0, we were providing remote connection services consisting of: troubleshooting via analog modem and management of cycle/event counters, hour counters, and events/alarms log on the machine, ready for the connection to an external supervision system, same thing for the extended troubleshooting on HMI for the alarms and the events log. Today, with the technological tools available, our machine automation allows various additional functions compared to what was done in the past:
- - Flexibility - format change (parameters from HMI)
- - Digitization - manuals and troubleshooting guide on the HMI
- - Customer care - worldwide remote access via the internet
- - IOT - possible worldwide machine status view (obviously only with the customer's permission)
- - Augmented reality - for mechanical / process support during a remote connection
- - Smart data - data transfer from machine to client-server, from the data table and/or database with a historical log of events, lots, etc.
- - Data online - depends on privacy settings
INDUSTRY 4.0
More than twenty years ago, even before we've heard about Industry 4.0, we were providing remote connection services consisting of: troubleshooting via analog modem and management of cycle/event counters, hour counters, and events/alarms log on the machine, ready for the connection to an external supervision system, same thing for the extended troubleshooting on HMI for the alarms and the events log. Today, with the technological tools available, our machine automation allows various additional functions compared to what was done in the past:
- - Flexibility - format change (parameters from HMI)
- - Digitization - manuals and troubleshooting guide on the HMI
- - Customer care - worldwide remote access via the internet
- - IOT - possible worldwide machine status view (obviously only with the customer's permission)
- - Augmented reality - for mechanical / process support during a remote connection
- - Smart data - data transfer from machine to client-server, from the data table and/or database with a historical log of events, lots, etc.
- - Data online - depends on privacy settings
Doser for liquids or semi-liquids with pressurized tank with flow meters.
- Dosing unit with flowmeter technology.
- All the parts in contact with the product are in stainless steel or other food grade material.
- All the areas are self drain "hygenic design".
- All the surfaces have finishing roughness below 0,8 microns.
- Max pressure: 4 bar.
- Absence of "dead ends".
- Radius min 6 mm.
- All the components connections are made using clamps CIP ready, collector included.
Fill products: kecthup, mayonnaise, mustard, alcoholic fruit pops, tomato paste, ice lollies, dressings, etc.
Doser for thick liquid products (margarine, chocolate, peanut paste) with pumping syringes, rotating cylinder and compensator.
The doser is mounted on a plate complete with compensator and small piston to rotate the 3-way valve. Heated system to keep the product fluid in the compensator.Fill products: margarine, chocolate, nut paste, etc.
FDCP-D
Doser for liquids with pumping syringes and diaphragm valve.
Volumetric feeder suitable for liquids. Complete with hopper, hopper lid and suitable injection nozzles for the product to dose. Servomotor driven doser to allow high speed and very precise control of product flow. All the parts in contact with the product are made of stainless steel or other food-grade material.
Fill products: Soy sauce, oil, vinegar, etc.
FDCP
Doser for liquids or semi-liquids (ketchup, mayonnaise, mustard, etc) with pumping syringes and rotating cylinder.
Volumetric feeder suitable for semidense liquids that might contain small particles. Complete with hopper, hopper lid and suitable injection nozzles for the product to dose. Servomotor driven doser to allow high speed and very precise control of product flow. All the parts in contact with the product are made of stainless steel or other food grade material. Fill products: ketchup, mayonnaise, mustard, hair gel, BBQ sauces, disinfectant, ice lollies, detergent, tomato paste, dressings, etc.
Fill products: ketchup, mayonnaise, mustard, hair gel, BBQ sauces, disinfectant, ice lollies, detergent, tomato paste, dressings, etc.
FWT
Doser for wet tissues.
Tissues are folded as required. It is possible to vary both the width and the length. Automatic detection of the tissue reel join.
The system includes a photocell for detecting the join on the tissue reel. The part of the reel with the join will be automatically discharged.
Automatic reel centering device to keep the non-woven material constantly aligned. The device compensates for any eventual imprecision in the unwinding of the reel.
Fill products: Non-Woven products + liquid.
FAF
Doser for fine non free flowing powders.AUGER FILLER DOSER
One (1) Multiple Auger Filler that includes :
- Product inlet horizontal screw feeder
- Pre feeding hopper with agitator
- dosing augers, straight or self feeding type driven by individual servomotors
- Servo driven product cut-off system
- All parts in contact with the product are made of Stainless Steel or other food grade material
- Dosing hopper with transparent inspection window for external level control by means of capacitance sensors
- Aluminium Frame Base to mount Multilane sachet machine lifting columns
- Programmable number of auger revolutions to achieve the targeted weight
- Programmable agitation control
- Alarm function indicators with error messages to aid location of problem
Fill products: Choccolate powder, digestive salts, instant drink, baking powder, vanilla sugar, pharma powder, powdered stock, non sugar sweeteners, etc.
FSSS
Tilting cup doser for free flowing powders and granules. .VOLUMETRIC FEEDING SYSTEM
Volumetric feeding system with oscillating movement used for free-flowing powders and granules, complete with hopper and feeding tubes. The oscillating movement is controlled by a servomotor to permit precise control of filling and discharging time of the dosing cups.
Fill products: detergents, soluble drinks, powdered soups, etc.
FGPV
Doser for fine powders with rotating cylinder. .GPV FEEDING SYSTEM
Feeding system suitable for powders and granules in variable doses. High speed product discharge by means of servomotors. Complete with hopper and feeding tubes. Dosing cavities with self cleaning system. Accessories available to give good dose tolerance. The oscillating movement is controlled by a servomotor to permit precise control of filling and discharging time of the dosing cups.
Fill products: salt, sugar, sweetener, sasoning, etc.
BIPACK
Boato Pack began its activity in 1957 with the name of Realizzazioni Meccaniche Boato. The founder, Mr. Giovanni Battista Boato, came from the automotive sector. Even then, more than 60 years ago, he had a futuristic view of standardization and attention to the supply chain, etc. That is why some components of our packaging machines came from the auto parts sector (Fiat 500 piston, Lambretta clutch); there are probably still some Lambretta clutches in our spare parts warehouse...SUSTAINABILITY
- - Precise process control (welding, cutting) - less waste, less garbage
- - Long-lasting quality components - fewer parts, fewer shipments
- - Digital documentation - less use of paper
- - Possibility of working with packaging materials of reduced thickness - thanks to the precision of the controls, less waste
- - Energy recovery servomotors - exchange capacity between axes inside the power bus
- - Solar power company - we produce a large part of the energy we consume
- - Extensive use of hybrid corporate vehicles
- - Reduced travel - technical and commercial services performed remotely as much as possible
RECYCLABILITY
- The "mono materials" currently trending as a recyclable solution require higher process accuracy in terms of temperature, pressure and cut control.
- Contrary to the trend, we built our machines taking expensive construction choices, characterizing them with superior controls and greater precision.
- The consequence is the possibility of working with conventional materials of lower weight and therefore cheaper, moreover, in large part, already naturally suitable for "mono materials".
SUSTAINABILITY
- - Precise process control (welding, cutting) - less waste, less garbage
- - Long-lasting quality components - fewer parts, fewer shipments
- - Digital documentation - less use of paper
- - Possibility of working with packaging materials of reduced thickness - thanks to the precision of the controls, less waste
- - Energy recovery servomotors - exchange capacity between axes inside the power bus
- - Solar power company - we produce a large part of the energy we consume
- - Extensive use of hybrid corporate vehicles
- - Reduced travel - technical and commercial services performed remotely as much as possible
RECYCLABILITY
- The "mono materials" currently trending as a recyclable solution require higher process accuracy in terms of temperature, pressure and cut control.
- Contrary to the trend, we built our machines taking expensive construction choices, characterizing them with superior controls and greater precision.
- The consequence is the possibility of working with conventional materials of lower weight and therefore cheaper, moreover, in large part, already naturally suitable for "mono materials".
INDUSTRY 4.0
More than twenty years ago, even before we've heard about Industry 4.0, we were providing remote connection services consisting of: troubleshooting via analog modem and management of cycle/event counters, hour counters, and events/alarms log on the machine, ready for the connection to an external supervision system, same thing for the extended troubleshooting on HMI for the alarms and the events log. Today, with the technological tools available, our machine automation allows various additional functions compared to what was done in the past:
- - Flexibility - format change (parameters from HMI)
- - Digitization - manuals and troubleshooting guide on the HMI
- - Customer care - worldwide remote access via the internet
- - IOT - possible worldwide machine status view (obviously only with the customer's permission)
- - Augmented reality - for mechanical / process support during a remote connection
- - Smart data - data transfer from machine to client-server, from the data table and/or database with a historical log of events, lots, etc.
- - Data online - depends on privacy settings
INDUSTRY 4.0
More than twenty years ago, even before we've heard about Industry 4.0, we were providing remote connection services consisting of: troubleshooting via analog modem and management of cycle/event counters, hour counters, and events/alarms log on the machine, ready for the connection to an external supervision system, same thing for the extended troubleshooting on HMI for the alarms and the events log. Today, with the technological tools available, our machine automation allows various additional functions compared to what was done in the past:
- - Flexibility - format change (parameters from HMI)
- - Digitization - manuals and troubleshooting guide on the HMI
- - Customer care - worldwide remote access via the internet
- - IOT - possible worldwide machine status view (obviously only with the customer's permission)
- - Augmented reality - for mechanical / process support during a remote connection
- - Smart data - data transfer from machine to client-server, from the data table and/or database with a historical log of events, lots, etc.
- - Data online - depends on privacy settings
SUSTAINABILITY
- - Precise process control (welding, cutting) - less waste, less garbage
- - Long-lasting quality components - fewer parts, fewer shipments
- - Digital documentation - less use of paper
- - Possibility of working with packaging materials of reduced thickness - thanks to the precision of the controls, less waste
- - Energy recovery servomotors - exchange capacity between axes inside the power bus
- - Solar power company - we produce a large part of the energy we consume
- - Extensive use of hybrid corporate vehicles
- - Reduced travel - technical and commercial services performed remotely as much as possible
RECYCLABILITY
- The "mono materials" currently trending as a recyclable solution require higher process accuracy in terms of temperature, pressure and cut control.
- Contrary to the trend, we built our machines taking expensive construction choices, characterizing them with superior controls and greater precision.
- The consequence is the possibility of working with conventional materials of lower weight and therefore cheaper, moreover, in large part, already naturally suitable for "mono materials".
INDUSTRY 4.0
More than twenty years ago, even before we've heard about Industry 4.0, we were providing remote connection services consisting of: troubleshooting via analog modem and management of cycle/event counters, hour counters, and events/alarms log on the machine, ready for the connection to an external supervision system, same thing for the extended troubleshooting on HMI for the alarms and the events log. Today, with the technological tools available, our machine automation allows various additional functions compared to what was done in the past:
- - Flexibility - format change (parameters from HMI)
- - Digitization - manuals and troubleshooting guide on the HMI
- - Customer care - worldwide remote access via the internet
- - IOT - possible worldwide machine status view (obviously only with the customer's permission)
- - Augmented reality - for mechanical / process support during a remote connection
- - Smart data - data transfer from machine to client-server, from the data table and/or database with a historical log of events, lots, etc.
- - Data online - depends on privacy settings
INDUSTRY 4.0
More than twenty years ago, even before we've heard about Industry 4.0, we were providing remote connection services consisting of: troubleshooting via analog modem and management of cycle/event counters, hour counters, and events/alarms log on the machine, ready for the connection to an external supervision system, same thing for the extended troubleshooting on HMI for the alarms and the events log. Today, with the technological tools available, our machine automation allows various additional functions compared to what was done in the past:
- - Flexibility - format change (parameters from HMI)
- - Digitization - manuals and troubleshooting guide on the HMI
- - Customer care - worldwide remote access via the internet
- - IOT - possible worldwide machine status view (obviously only with the customer's permission)
- - Augmented reality - for mechanical / process support during a remote connection
- - Smart data - data transfer from machine to client-server, from the data table and/or database with a historical log of events, lots, etc.
- - Data online - depends on privacy settings
SUSTAINABILITY
- - Precise process control (welding, cutting) - less waste, less garbage
- - Long-lasting quality components - fewer parts, fewer shipments
- - Digital documentation - less use of paper
- - Possibility of working with packaging materials of reduced thickness - thanks to the precision of the controls, less waste
- - Energy recovery servomotors - exchange capacity between axes inside the power bus
- - Solar power company - we produce a large part of the energy we consume
- - Extensive use of hybrid corporate vehicles
- - Reduced travel - technical and commercial services performed remotely as much as possible
RECYCLABILITY
- The "mono materials" currently trending as a recyclable solution require higher process accuracy in terms of temperature, pressure and cut control.
- Contrary to the trend, we built our machines taking expensive construction choices, characterizing them with superior controls and greater precision.
- The consequence is the possibility of working with conventional materials of lower weight and therefore cheaper, moreover, in large part, already naturally suitable for "mono materials".